Click on the Spa or Filter images below that match your housing. The link will then take you to the right filters for your Canadian Spa Company hot tub, and you can then place your filter order.

For spa models: St Lawrence swim spa range, Grand Bend, Alberta, Kingston, Niagara, Vancouver, Victoria, Thunder Bay, Toronto UV, Erie SE, London SE, Cambridge, Winnipeg, Montreal, Quebec, Calgary, Kelowna, Muskoka, Manitoba, Gander, Saskatoon, & Okanagan.

The correct filters are needed to protect the spa components and is a must for the hot tub's longevity, this is ultimately more cost effective.

Our Filters have the following features;

1. Antimicrobial material fights and inhibits bacteria growth in your hot tub.
2. Silver ion-infused plastic does not allow bacteria to build up in or around the filter.
3. Fine mesh pre-filter, acts as a first defense against spa water contaminants.
4. Less frequent filter replacement schedule.
5. Cleaner water overall.
6. Easy to clean pleats, just rinse with a hose once a week.

 

Pre-Filter Screen that sits on top of 100ft filter housing models that are shown below.
100Sq ft filter housing
X2 Glacier filters needed (KA-10032)

Includes pre-filter

Change every 6-8 months


100Sq ft filter housing
X2 Glacier filters needed (KA-10032)

Includes pre-filter

Change every 6-8 months


100Sq ft filter housing
X2 Glacier filters needed (KA-10032)

Will be shorter than your current ones.

Includes pre-filters

Change every 6-8 months



1 single glacier filter (KA-10082)

Change every 4-5 months


 
1 single glacier filter (KA-10082)

Change every 4-5 months


 
1 single 50Sq ft slip filter (KA-10004)

Filter Size: 336 X 127 x 55MM

Change every 4-5 months

 
1 single 35Sq ft slip filter (KA-10007)
Filter size: 230 x 125 x 55MM
(For Yukon model)
Change every 4-5 months
200Sq ft Swim Spa filters After 2011 (KA-10009)

Change every 6-8 months



Article published by Ali Green